Masimo Rad-8 Tabletop Spo2 Monitor
This professional pulse oximeter from Masimo allows you to monitor blood oxygen levels in the hospital, doctor's office or the comfort of your the patient's home. The Home Mode feature allows for safe and accurate monitoring and trending while at home, and this pulse ox machine has RadNet and RadLink interface capability for multi-patient remote monitoring. In addition to the SIQ bar, FastSat, Alarm Status Indicator and PI found on the Rad-5 Oximeter, the Rad-8 is equipped with Adaptive Probe Off Detection, which offers the best probe off detection of Masimo's three sensitivity modes. Sensor must be purchased separately.
Additional features such as a 2-second averaging in sleep mode, 72 hours of trending memory, and nurse call interface make this machine one of the best blood oxygen meters on the market. Shop online today and receive free shipping on this high-quality oximeter!
A fully-featured pulse oximeter with the accuracy and reliability of Masimo SET, perfect for both continuous monitoring and spot-check applications.
- > Masimo SET® technology is scientifically and clinically proven to provide accurate pulse oximetry measurements during motion and low perfusion
- > Sleep Mode easily configures system to perform bedside studies
- > 2 second averaging in sleep mode
- > Home Mode allows for safe and accurate monitoring and trending at home
- > RadNet® and RadLink® interface capability for multi-patient remote monitoring
- > Perfusion Index (PI) indicates arterial pulse signal strength and may be used as a diagnostic tool during low perfusion1
- > Low Signal IQ® (SIQ) indicator highlights conditions of low signal quality
- > FastSat™ tracks rapid changes in arterial O2 with high fidelity unlike any other pulse oximeter
- > APOD™ (Adaptive Probe Off Detection) offers the best probe off detection of Masimo's three sensitivity modes - APOD, Normal and MAX sensitivity
- > Adjustable averaging 2 to 16 seconds
- > Nurse call interface
- > Up to 7 hours of internal battery life when fully charged
- > 72 hours of trending memory
- > Available in horizontal and vertical configurations
- > Compatible with Philips Vuelink device interface module
![]()
A:Signal I.Q.® (SIQ) bar is used for signal identification and quality indication during motion and low signal to noise situations. The LED rises and falls with the pulse, its height indicating signal quality. When Signal I.Q. is very low, and the SpO
2 and pulse rate values may be suspect, the LED turns red.
![]()
B:FastSat™ tracks rapid changes in arterial O2 with unmatched fidelity.
C:The Alarm Status Indicator flashes when an alarm condition is present.
D:Perfusion Index (PI) indicates arterial pulse signal strength. The LED bar is highest and green when the quality of the perfused site is best; when PI is poor the LED bar is low and turns red.
![]()
In The Box:
- Masimo Rad-8 Tabletop Pulse Oximeter
- Masimo 2056 LNCS (LNC-10) Patient Cable - 10 Ft Length
- Power cord for US Outlets
